BASE PLATE
Description: Designed to fit verticallyat the lowest end of frame scaffold and pipe scaffold.
BEAM CLAMP
Description: Designed to use (pair)for repair work together with steel member like H Beam.
BS SWIVEL CLAMP
Description: British Standard (BS) SwivelClamp is a more durable version from the typical Swivel Clamp. It is a load bearing coupler that is commonly used to connect two scaffold tubes, crossing at any angle as needed.
CLAMP COVER
Description: Used for covering all the sharp edges of Swivel or Fixed Clamp to protect nearby passer-by. Typcally used in places with high human traffic.
END CAP
Description: Also known as Pipe Cap and it is used for covering the pipe ends for safety purposes.
FIXED CLAMP
Description: A load bearing coupler to connect two scaffold tubes at right angles (90 degree).
SCREW PROTECTION
Description: To cover up the screws(covered in yellow) so as to prevent scratching passer-by. Typically used in places with high human traffic.
SLEEVE COUPLER
Description: An external fitting to connect vertically or horizontally end to end of tubular pipes.
BOLTS, NUTS & PINS
Description: Wall plugs, bolt and nut, repairing parts upon request.
SWIVEL CLAMP
Description: A load bearing coupler that is used for connecting two scaffold tubes and able to cross at any angles as needed.
LIMPET CLAMP
Description: Designed to secure scaffold boards and support pipes.
HEAVY DUTY FIRE RESISTANT NET
Description: Safety net is temporarily installed vertically at the perimeter of scaffolding system to prevent any falling debris.